Introduction 15
11. MODE/ENTER
Selects an available picture setup
mode. See "Selecting a picture
mode" on page 39 for details.
Enacts the selected On-Screen
Display (OSD) menu item. See
"Using the menus" on page 31 for
details.
12. POWER
Toggles the projector between
standby mode and on.
See "Starting up the projector" on
page 28 and "Shutting down the
projector" on page 50 for details.
13. LAMP indicator light
Indicates the status of the lamp.
Lights up or flashes when the lamp
has developed a problem. See
"Indicators" on page 73 for details.
14. TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high.
See "Indicators" on page 73 for
details.
To Next Page
Loading...
