Connection 27
Playing sound through the projector
You can make use of the projector (mixed mono) speaker in your
presentations, and also connect separate amplified speakers to the AUDIO
OUT socket of the projector.
If you have a separate sound system, you will most likely want to connect the
audio output of your Video source device to that sound system, instead of to
the mono audio projector.
Once connected, the audio can be controlled by the projector On-Screen
Display (OSD) menus.
The table below describes the connection methods for different devices, and
where the sound is from.
Device Computer/PC Component/
S Video/Video
HDMI
Audio input port AUDIO IN (mini
jack)
AUDIO (L/R) HDMI
The projector can play
the sound from...
AUDIO IN (mini
jack)
AUDIO (L/R) HDMI
Audio output port AUDIO OUT AUDIO OUT AUDIO OUT
The selected input signal determines which sound will be played by the projector
speaker, and which sound will be output from the projector when AUDIO OUT is
connected. If you select the COMPUTER/PC signal, the projector can play the
sound received from AUDIO IN mini jack. If you select the COMPONENT/VIDEO
signal, the projector can play the sound received from AUDIO (L/R).
To Next Page
Loading...
