Connection26
Connecting video source devices
You need only connect the projector to a video source device using just one
of the connecting methods, however each provides a different level of video
quality. The method you choose will most likely depend upon the availability
of matching terminals on both the projector and the video source device as
described below:
Connecting audio
The projector has one built-in mono speaker which are designed to provide
basic audio functionality accompanying data presentations for business
purposes only. They are not designed for, nor intended for stereo audio
reproduction use as might be expected in home theater or home cinema
applications. Any stereo audio input (if provided), is mixed into a common
mono audio output through the projector speaker.
The built-in speaker will be muted when the AUDIO OUT jack is
connected.
• The projector is only capable of playing mixed mono audio, even if a
stereo audio input is connected. See "Connecting audio" on page 26 for
details.
• If the selected video image is not displayed after the projector is turned
on and the correct video source has been selected, check that the video
source device is turned on and operating correctly. Also check that the
signal cables have been connected correctly.
Te r m i n a l n a m e Terminal appearance Picture quality
HDMI Best
Component Video Better
S-Video Good
Video Normal
To Next Page
Loading...
