Connection 25
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the
projector (see "Shipping contents" on page 11). They are commercially
available from electronics stores.
Many notebooks do not turn on their external video ports when connected
to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the
external display on/off. Locate a function key labeled CRT/LCD or a function
key with a monitor symbol on the notebook. Press FN and the labeled
function key simultaneously. Refer to your notebook's documentation to find
your notebook's key combination.
1. VGA cable
2. VGA to DVI-A cable
3. USB cable (B to A type)
4. HDMI cable
5. S-Video cable
6. Video cable
7. Audio cable
8. Audio L/R cable
9. USB cable (mini B to A type)
10. USB cable (A to mini B type)
connect to Laser Module PT01
4
7
65
7
8
10
13921
7
To Next Page
Loading...
