17
Moire
Horizontal & Vertical Moire adjustment
Horizontal Moire: adjusts horizontal Moire
Vertical Moire: adjusts vertical Moire
Moire refers to an interference pattern of dark wavy lines on the screen. It is an
interference phenomenon caused by the relationship between the phosphor lay-
out and the imaging signal. In fact, it is often considered an indication of good
focus level.
It is especially noticeable when using a light-gray or every-other-
dot pattern. Moire cannot be eliminated. However, it can be reduced
with the moire reduction feature.
Moire can be reduced by adjusting the iscreen moire reduction function. Prior to
adjustment, set the screen to a full white pattern so that moire will be visible. After
this adjustment, make changes to a different screen background in order to re-
duce moire even further.
If the picture is unstable when you adjust the moire reduction setting,
over-adjustment has occured. Please lower the moire reduction setting
level. (Factory default setting value : 0).
A Look at the Control Panel
To Next Page
Loading...
