24
Chapter 4
§ If the characters look dark, the picture is too small, too large or not centered
etc.
Adjust related settings. See Chapter 3, A Look at the Control Panel.
§ If colors are impure.
Check signal cable connector pins. If pins are bent or missing, consult your
dealer
Adjust the Purity setting. See Chapter 3, A Look at the Control Panel.
Maintenance
✗ Do not expose the monitor to direct sunlight or heat.
✗ Do not spill liquid on the monitor.
✗ Do not attempt to open the monitor. You may be hurt by electric shock. For
service, call your dealer.
✗ Do not use your monitor when magnets or electronic products are operat-
ing nearby.
✗ Do not use harsh chemicals or strong cleaning solvents to clean the monitor
screen. Wipe it with mild solution applied on clean and soft cloth.
✗ Do not place anything on your monitor. Bad ventilation may elevate tem-
perature within the monitor.
Need More Help?
If your problems remain after checking this manual, please contact your place of
purchase or e-mail us at: DPLservice@benq.com
To Next Page
Loading...
