EasyManua.ls Logo

BenQ P211 - Safety Instructions

BenQ P211
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iv
Safety Instructions !
The AC plug isolates this equipment from the AC supply.
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Slots and openings in the cabinet and the back or bottom are provided
for ventilation. They must not be blocked or covered. This product
should never be placed near or over a radiator or heat register, or in a
built-in installation unless proper ventilation is provided.
This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
This product should be operated with a 3-wire grounding-type plug, a
plug having a third (grounding) pin. This plug will only fit into a ground-
ing-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to make the nec-
essary outlet changes.
Never push objects of any kind, or spill liquid of any kind into this product.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltages or other risks. If any
above mentioned misuse or other accident (dropping, mis-operations)
occurs, contact qualified service personnel for servicing.
Use only the proper type of power supply cord set (provided in your PC
box) for this unit. It should be a detachable type: UL listed/CSA certified,
type SVT/SJT, VDE approved or its equivalent.
The power supply cord serves as a power disconnect device for pluggable
equipment. The socket outlet shall be installed near the equipment and
shall be easily accessible.
Safety

Related product manuals