20 How to assemble your monitor hardware
How to detach the stand
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the power cable. Turn off the computer before
unplugging the monitor signal cable.
2. Remove the back cover.
Remove the back cover from its bottom as illustrated.
Unplug all cables carefully.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
3. Remove the monitor stand.
While pressing and holding the quick release button,
detach the stand from the monitor.
If the monitor stand is removed for wall mounting, see Using
the monitor wall mounting kit on page 25 and the
instruction manual of your wall mount bracket (purchased
separately) for more information.
To Next Page
Loading...
Need help?
General
