BenQ PD Series User Manual

46 Navigating the main menu
Input menu
Available menu options may vary depending on the input sources, functions and settings. Menu
options that are not available will become grayed out. And keys that are not available will be
disabled and the corresponding OSD icons will disappear. For models without certain functions,
their settings and related items will not appear on the menu.
1. Select (Menu) from the hot key menu.
2. Use or to select Input.
3. Select to go to a sub menu, and then use or to select a menu item.
4. Use or to make adjustments, or use to make selection.
5. To return to the previous menu, select .
6. To exit the menu, select .
Signal Input
PIP
PBP
PBPx4
SWAP
Input
Picture
Color
Audio
KVM Switch
Custom Key
MoveBack Confirm
System
2
Mode: sRGB
Left
Right
Thunderbolt 3
DisplayPort
HDMI1
HDMI2
Item Function Range
Signal
Input
Use this to change the input to that appropriate to your
video cable connection type.
Manual selection of signal input will disable the source switch
function of KVM Switch. If you prefer to use KVM Switch after
manual source selection here, be sure follow the instructions in
Setting up the second video source for KVM Switch before use on
page 39 again to set properly.
•Thunderbolt
3
•DisplayPort
•HDMI1
•HDMI2

BenQ PD Series Specifications

General

Brand	BenQ
Model	PD Series
Category	Monitor
Language	English