56 Navigating the main menu
Video Input Presets a video input to go with the USB Upstream port.
See Setting up the second video source for KVM Switch
before use on page 39.
If None is selected from KVM Switch > Video Input for
Scenario A: Working with two computers and one monitor on
page 40 and USB Upstream is selected for KVM Switch, the
screen does not display anything from the second source as there
is none. You cannot control the current display (from
Thunderbolt™ 3) either as the keyboard and mouse control has
been switched away. In this case, select a video input manually
from Input > Signal Input.
• DisplayPort
• HDMI1
• HDMI2
• None
Auto Switch Once enabled, if USB or Thunderbolt™ 3 cable is
disconnected, the USB input source and the control will be
switched to the other computer automatically.
• ON
• OFF
Item Function Range
To Next Page
Loading...
