To Next Page
J
Jon CruzSep 8, 2025
How to fix a faulty coloration image on BenQ Digital Signage?
- KKeith GonzalezSep 8, 2025
If the image on your BenQ Digital Signage has a faulty coloration, make sure the video cable is connected firmly to the display.
How to fix a faulty coloration image on BenQ Digital Signage?
If the image on your BenQ Digital Signage has a faulty coloration, make sure the video cable is connected firmly to the display.
What to do if my BenQ Digital Signage picture is unstable, unfocused, or swimming?
If the picture on your BenQ Digital Signage is unstable, unfocused, or swimming, ensure the video cable is firmly connected to the display. You can also go to Screen > Adjust Screen in the display settings to focus and adjust the display; try Auto Adjustment first, and if that doesn't help, make adjustments manually. If the display mode has been changed, you may need to adjust the screen again. Check if a supported timing is set by pressing INFO on the remote control to find out the current resolution and timing, or check this information from your computer. Finally, try using a different video cable.
General| Display Type | LCD |
|---|---|
| Screen Size | 46 inches |
| Resolution | 1920 x 1080 (Full HD) |
| Brightness | 500 cd/m² |
| Contrast Ratio | 4000:1 |
| Viewing Angle | 178°/178° |
| Response Time | 8ms |
| Control | RS232, LAN |
| Orientation | Landscape / Portrait |
| Display Colors | 16.7 million |
| Connectivity | LAN |
| Input Ports | HDMI, DVI-D, VGA, Composite, Component |
| Output Ports | Audio Out |
