14
English
Projection lens selection and Installation
When installing the lens into the projector, be sure to remove the lens cap from the back of the optional lens before
installing the optional lens into the projector. Failure to do so will cause damage to the projector.
Installing or Removing the Optional Lens
Installing the New Lens
1. Remove the lens cap.
Push LENS CHANGE button and then insert the Lens with arrow mark on top.
Arrow Mar k
2. No more push LENS CHANGE button after lens insertion. Rotate the Lens clockwise until
click sound twice.
Installing the New Lens Using the Anti-theft Screw
Using the anti-theft screw to prevent theft of the lens.
Tighten the supplied anti-theft screw on the front bottom.
Anti-theft screw
To Next Page
