BenQ ST550K User Manual (English)

Other manuals for BenQ ST550K

User Manual51 pages

Installation Handbook107 pages

Questions and Answers:

V
Vanessa CannonAug 14, 2025
Why is my BenQ ST550K remote control not working?
- D
  Deborah CampbellAug 14, 2025
  If the remote control for your BenQ Digital Signage isn't working, consider these possible solutions: * Ensure the remote control function isn't locked; unlock it if it is. * Verify the batteries are correctly oriented and not dead; replace them if needed. * Make sure you're within range and at the correct angle to the display. * Confirm the remote is pointed directly at the display's sensor window, with no obstructions. * Check for strong fluorescent lighting or direct sunlight affecting the sensor. * Look for nearby devices emitting infrared signals that could cause interference; turn off their infrared function.
S
Shawn MaddoxAug 17, 2025
What to do if BenQ ST550K shows no picture?
- D
  davidbellAug 17, 2025
  If your BenQ Digital Signage display shows no picture, please check the following: * Ensure the display is turned on by checking the power indicator. * Verify the signal source device is on; turn it on if it is off. * Check all cable connections to ensure they are firmly connected. * Confirm that the computer's output resolution is supported (refer to Supported input signal resolution on page 44 to select a supported resolution). * If using a DVD or Blu-ray player, ensure its output resolution is supported (refer to Supported input signal resolution on page 44 to select a supported resolution).
B
Brandon GutierrezAug 21, 2025
How to fix BenQ Digital Signage when there is no sound?
- S
  Susan CollierAug 21, 2025
  If there is no sound from your BenQ Digital Signage, check whether the mute function is enabled on either the display or the input source device. If it is, turn off mute or increase the volume. Also, ensure all cable connections are secure.
E
Elizabeth SpencerAug 25, 2025
What to do if the computer input image looks strange on BenQ ST550K Digital Signage?
- L
  lance63Aug 26, 2025
  If the computer input image appears strange on your BenQ Digital Signage, try the following: * Ensure that the computer's output resolution is supported (refer to Supported input signal resolution on page 44 to select a supported resolution). * Use the Auto Tune function (See Picture menu on page 24) to automatically optimize the image. * If Auto Tune is not satisfactory, manually adjust the image using the Phase, Horizontal Position, and Vertical Position functions.
M
Michelle FrenchAug 27, 2025
What to do if the BenQ Digital Signage remote control does not work?
- J
  Jonathan EspinozaAug 27, 2025
  If the remote control for your BenQ Digital Signage isn't working, try these steps: * Ensure the remote control function isn't locked; unlock it if it is. * Verify the batteries are correctly oriented and not dead; replace them if needed. * Make sure you're within range and pointing the remote at the display's sensor. * Check for obstructions between the remote and the sensor. * Ensure the sensor isn't under strong light or direct sunlight. * Turn off infrared functions on nearby devices like computers or PDAs that might interfere with the signal.
P
Pamela JacksonAug 31, 2025
How to troubleshoot no picture on BenQ Digital Signage?
- T
  Tracey JohnsonAug 31, 2025
  If your BenQ Digital Signage display shows no picture, please check the following: * Ensure the display is powered on by checking the power indicator. * Verify the signal source device is on; turn it on if it's off. * Check all cable connections to ensure they are firmly connected. * Confirm that the computer's output resolution is supported (refer to Supported input signal resolution on page 41 to select a supported resolution). * Ensure the DVD or Blu-ray player's output resolution is supported (refer to Supported input signal resolution on page 41 to select a supported resolution).
J
josephsandersSep 3, 2025
Why is there no sound on my BenQ Digital Signage?
- B
  Blake NolanSep 4, 2025
  If there is no sound from your BenQ Digital Signage, make sure that the mute function is off on both the display and the input source device, or increase the volume. Also, check all cable connections to ensure they are firmly connected.
T
Timothy RuizSep 7, 2025
How to fix a strange computer input image on BenQ Digital Signage?
- C
  Cynthia MahoneySep 7, 2025
  If the computer input image looks strange on your BenQ Digital Signage, try these solutions: * Ensure that the computer's output resolution is supported (refer to Supported input signal resolution on page 41 to select a supported resolution). * Use the Auto Tune function (See Picture menu on page 24) to automatically optimize the display of the computer image. * If Auto Tune is not satisfactory, manually adjust the image using the Phase, Horizontal Position, and Vertical Position functions.
F
fgonzalezSep 10, 2025
What to do if the BenQ Digital Signage control panel buttons do not work?
- C
  cordovalisaSep 10, 2025
  If the control panel buttons on your BenQ Digital Signage aren't working, check if the control panel buttons are locked. If they are, unlock them and try again.

BenQ ST550K Specifications

General

Response Time	8 ms
Operating Hours	24/7
RAM	2GB
VESA Mount	400 x 400 mm
Display Size	55 inches
Viewing Angle	178° (H) / 178° (V)
Operating System	Android
Orientation	Portrait/Landscape
Connectivity	Wi-Fi, Ethernet
Processor	Quad-core
Standby Power Consumption	0.5W
Built-in Speakers	10W x 2