BenQ SL461A User Manual (English)

Other manuals for BenQ SL461A

Questions and Answers:

E
Eric LittleAug 14, 2025
Why is there no sound on my BenQ SL461A Digital Signage?
- R
  Richard BeanAug 14, 2025
  If you can see the picture but cannot hear any sound on your BenQ Digital Signage, there are several possible reasons: 1. The source signal cable may not be properly connected. Ensure that both video and sound inputs are correctly connected. 2. The volume might be turned down. Press the [VOL UP] or [VOL DOWN] button to adjust the sound. 3. [MUTE] may be activated. Deactivate MUTE using the [MUTE] button. 4. External speakers might not be connected. Connect external speakers and adjust the volume accordingly.
K
Karen GilbertAug 17, 2025
What to do if my BenQ SL461A displays no picture?
- J
  Jennifer JohnsonAug 17, 2025
  If your BenQ Digital Signage is not displaying a picture, consider the following: 1. Check if the power cord is properly connected and plug it in if it's disconnected. 2. Ensure that the main power switch on the back of the display is switched on. 3. Verify that the selected input has a signal connection to the display. 4. The display might be in standby mode.
J
Joan TaylorAug 21, 2025
Why is the color abnormal on my BenQ Digital Signage?
- K
  Krystal NicholsAug 21, 2025
  If the color on your BenQ Digital Signage appears abnormal, the signal cable may not be properly connected. Ensure that the signal cable is firmly attached to the back of the display.
J
Jorge NormanAug 25, 2025
What to do if I can hear sound but there is no picture on my BenQ SL461A Digital Signage?
- J
  Justin WintersAug 25, 2025
  If you can hear sound but there is no picture on your BenQ Digital Signage, the source signal cable may be improperly connected. Make sure that both video inputs and sound inputs are correctly connected.
P
Paul AlvarezAug 27, 2025
Why is the picture distorted on my BenQ Digital Signage?
- A
  alexis70Aug 27, 2025
  If the picture on your BenQ Digital Signage is distorted with abnormal patterns: 1. The signal cable may not be connected properly. Ensure that the signal cable is firmly attached. 2. The input signal might be beyond the capabilities of the display. Check the video signal source to see if it exceeds the display's range, referring to the display’s specification section to verify.
L
Lindsay CastilloAug 31, 2025
How to fix interference on BenQ SL461A Digital Signage?
- J
  jennifergonzalezAug 31, 2025
  If you are experiencing interference or audible noise with your BenQ Digital Signage, it could be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
J
Jacqueline CruzSep 3, 2025
Why doesn't the image fill the screen on my BenQ SL461A?
- L
  Laura GrimesSep 3, 2025
  If the display image on your BenQ Digital Signage doesn’t fill the full screen, the zoom mode may not be correctly set. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameters.
L
Lisa Herrera DVMSep 7, 2025
What causes after-images on BenQ SL461A?
- K
  Kevin WilliamsSep 7, 2025
  After-images on your BenQ Digital Signage can occur if a still picture is displayed for an extended period. To prevent this, avoid displaying a still image for a prolonged time, as it can cause a permanent after-image to remain on the display.
S
Shannon SmithSep 9, 2025
Why some picture elements do not light up on BenQ SL461A Digital Signage?
- K
  Kim BaileySep 9, 2025
  Your BenQ Digital Signage is manufactured with high-precision technology. However, some pixels may not display. This is not a malfunction.