Operation 47
The tools page allows you to manage the projector, configure the LAN control settings and
secure access of remote network operation on this projector.
1. You can name the projector, keep track of its location and the person in charge of it.
2. You can adjust the LAN Control Settings.
3. Once set, access to the remote network operation on this projector has been
password protected.
4. Once set, access to the tools page has been password-protected.
5. Press Exit to go back to the remote network operation page.
After making the adjustments, press the Send button and the data will be saved in the projector.
Please pay attention to the limitation of input length (including space and other punctuation
keys) in the list blow:
Category item Input length
Maximum number of
characters
Crestron Control IP Address 15
IP ID 4
Port 5
Projector Projector Name 22
Location 22
Assigned To (N/A)
Network
Configuration
DHCP (Enabled) 15
IP Address 15
Subnet Mask 15
Default Gateway 15
DNS Server (N/A)
User Password Enabled (N/A)
New Password 15
Confirm 15
Admin Password Enabled (N/A)
New Password 15
Confirm 15
To Next Page
Loading...
