Operation 57
3. Source menu
Quick Auto
Search
See "Switching input signal" on page 33 for details.
HDMI Range
Selects an input source type for the HDMI signal. Auto is the default
and recommended setting. You can also manually select the source
type. The different source types carry different standards for the
brightness level.
This function is only available when the HDMI signal is selected.
Color Space
Conversion
See "Changing Color Space" on page 33 for details.
4. System Setup: Basic menu
Presentation
Timer
Reminds the presenter to finish the presentation within a certain
time frame. See
"Setting the presentation timer" on page 40
for details.
Language
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 29 for details.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See "Choosing a location" on page 18 for
details.
Menu Setting
Menu Display Time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Reminder Message
Selecting On allows the projector to remind you to clean the filter.
FUNCTION DESCRIPTION
To Next Page
