Operation58
4. System Setup: Basic menu
Operation
Setting
Direct Power On
Powers projector on automatically when the power cable is
connected.
Signal Power On
Sets whether to turn the projector directly on without pressing
POWER or ON when the projector is in standby mode and the
signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 64 for details.
Instant Restart
Selecting On enables you to restart the projector immediately
within 90 seconds after turning it off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image"
on page 41 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 12 hours.
Remote
Receiver
Sets the preferred remote receiver (Front and Rear) allowing the
projector to accept signals from the remote control.
Panel Key
Lock
Disables or enables all panel key functions except POWER on
the projector and keys on the remote control. See
"Locking control
keys" on page 42
for details.
Background
Color
Selects background appearance when there is no signal.
Splash Screen
Allows you to select which logo screen will appear during projector
start-up
FUNCTION DESCRIPTION
To Next Page
