Operation 59
5. System Setup: Advanced menu
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 42 for details.
Audio Settings
See "Adjusting the sound" on page 42 for details.
Mute
Sets the mute function.
Volu me
Adjusts the audio volume level.
Microphone volume
Adjusts the microphone sound level.
Power on/off Ring Tone
Sets the power on/off ring tone.
Lamp Settings
Lamp Mode
See "Setting Lamp mode as Economic or SmartEco" on page 63 for
details.
Reset lamp timer
See "Resetting the lamp timer" on page 68 for details.
Lamp Timer
See "Getting to know the lamp hour" on page 63 for details on how
the total lamp hour is calculated.
Security
Setting
Change Password
You will be asked to enter the current password before changing to a
new one. See "Utilizing the password function" on page 30 for
details.
Change Security Settings
Power On Lock
When Power On Lock is activated, you will be asked to enter the
current password before powering on the projector.
If you enter incorrect password 5 times in succession, the projector
will automatically shut down in a short time.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update
or download the projector’s firmware. This function is intended for
qualified service personnel.
HDMI
Equalizer
Select HDMI equalizer value.
Te s t P a t t e r n
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check
that the projected image is free from distortion.
FUNCTION DESCRIPTION
To Next Page
