26 Menu operation
PICTURE menu
Picture Mode
The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
• Bright: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
• Living Room: With well-saturated color, fine-tuned sharpness, and a higher
brightness level, this mode is suitable for playing movies in rooms where there is a
small amount of ambient light, e.g. your living room.
• Cinema (Rec. 709): Providing accurate color of 100% Rec. 709 and deepest
contrast at lower brightness level, this mode is suitable for playing 1080P SDR
movies in an environment with a bit of ambient light, like in a living room.
• DCI-P3: In accordance with 100% DCI-P3 color gamut, this mode provides
deepest contrast at lower brightness level. It is suitable for playing 4K SDR movies
in a totally dark environment, as if in a commercial cinema.
• User: Recalls the settings customized based on the current available picture
modes. See User Mode Management on page 27.
• Silence: Minimizes the acoustic noise. It is suitable for the need of watching
movies that requires an ultra-quiet environment so that you won't be disturbed by
the noise of the projector. This mode is only available when the DISPLAY >
Silence menu is set at On.
• 3D: Optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
• HDR10/HLG: Delivers High Dynamic Range effects with higher contrasts of
brightness and colors. This mode is best for watching 4K Blu-ray HDR10 or HLG
streaming contents with 100% Rec. 709 color gamut. Picture Mode will be
switched to HDR10/HLG automatically while detecting metadata or EOTF info
from 4K Blu-ray HDR10 or HLG streaming contents.
• This mode is only available when DISPLAY > HDR is set at Auto, and HDR
content is detected.
• Color gamut can be enlarged to 100% DCI-P3 in the HDR10/HLG mode for
more accurate color reproduction. Turn on Wide Color Gamut under the
PICTURE > Advanced menu.
To Next Page
Loading...
