BenQ V6000 - Page 38

38 Maintenance
Indicator
Light
Status & Description
POWER indicator (lights up constantly
or flashes repeatedly)
Power events
Stand-by mode
Powering up
Normal operation
Normal power-down cooling
Lens cover failed
Download TI
Burn-in ON
Burn-in OFF
CW failed
PW failed
Light source events
Light source error in normal operation
Light source is not lit up
Thermal events
Temperature 1 error (over limited temperature)
Fan 1~ fan 6 error (the actual fan speed is outside the
desired speed)
: Off : Blue : White : Red : Green
0.5s 0.5s 0.5s 0.5s
0.5s 0.5s 0.5s 0.5s
0.5s 0.5s 0.5s 0.5s
0.5s 0.5s 0.5s 0.5s
0.5s 0.5s 1s
0.5s 0.5s 1s
0.5s 0.5s 1s
0.5s 0.5s 1s
0.5s 0.5s 1s
0.5s 0.5s 1s