BenQ W1070+ - Correcting Keystone Distortion

28
Operation
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or
bottom. It occurs when the projector is not perpendicular to the screen.
You may correct this in ONE of these ways.
• Using the remote control
Press KEYSTONE to display the 2D Keystone window.
• Using the projector
Press / , / , / , or / to display the 2D Keystone window.
2D Keystone
Press "BACK" to return
• To correct keystoning at the top of the image, use
or / .
• To correct keystoning at the bottom of the image,
use or / .
• To correct keystoning at the right side of the image,
use or / .
• To correct keystoning at the left side of the image,
use or / .
When done, press BACK to save your changes and exit.
use or /
use or /
use or /
use or /