BenQ W2710 - Page 22

22
Write
Saturation -
<CR>*saturation =-#<CR>
YES
Write
Set Saturation value
<CR>*saturation =value#<CR>
YES
Read
Get Saturation value
<CR>*saturation =?#<CR>
YES
Write
Gain +
<CR>*gain=+#<CR>
YES
Write
Gain -
<CR>*gain=-#<CR>
YES
Write
Set Gain value
<CR>*gain=value#<CR>
YES
Read
Get Gain value
<CR>*gain=?#<CR>
YES
Write
Color Gamut Auto
<CR>*cgamut=auto#<CR>
NO
Write
Color Gamut BT.709
<CR>*cgamut=bt.709#<CR>
NO
Write
Color Gamut BT.2020
<CR>*cgamut=bt.2020#<CR>
NO
Write
Color Gamut DCI-P3
<CR>*cgamut=dci-p3#<CR>
NO
Read
Color Gamut Value
<CR>*cgamut=?#<CR>
NO
Write
Dynamic Iris ON
<CR>*diris=on#<CR>
YES
Write
Dynamic Iris OFF
<CR>*diris=off#<CR>
YES
Read
Dynamic Iris status
<CR>*diris=?#<CR>
YES
Write
Color Calibration Save
<CR>*colorsave#<CR>
YES
Write
Color Calibration
pattern display
<CR>*colorpattern=value#<CR>
YES
Note: The above function will be varied from model to model.