Doc No. 20-45-159 Page 2 of 60
Any reference made to Laws, Standards, Directives, Codes of Practice or other recommendations governing
the application and installation of heating appliances and which may be referred to in Brochures,
Specications, Quotations, and Installation, Operation and Maintenance manuals is done so for information
and guidance purposes only and should only be considered valid at the time of the publication.
The Manufacturer cannot be held responsible from any matters arising from the revision to or introduction
of new Laws, Standards, Directives, Codes of Practice or other recommendations.
IMPORTANT NOTICE TO INSTALLERS
Installers should satisfy themselves that the gas pipework installation is carried out in accordance
with all current legislation, Codes of Practice and recommendations .
Additionally it may be necessary to protect the gas valves which form part of the heater or burner
assembly from potential pipe contamination particularly, but not exclusively, where copper gas
pipework is used.
In instances where copper pipework is to be used for all or part of a gas pipework installation, including
short length nal connections then we advise that installers consult with gas supplier or provider and
satisfy themselves what additional precautions may be necessary
To Next Page
Loading...
