3 Bentone
General
Table of contents
1. General Information __________________________________ 4
2. Technical data B 80-3 _________________________________ 7
2.1 Dimensions ______________________________________ 7
2.2 Working field B 80-3 _______________________________ 8
2.3 Setting of brake plate and air flow ___________________ 8
2.4 Nozzle selection __________________________________ 9
2.5 Setting of brake disc and air flow ____________________ 9
2.6 Burner installation _________________________________ 9
2.7 Recommended nozzle and pressure _________________ 9
2.8 Nozzle table. ____________________________________ 10
2.9 Description ______________________________________ 12
3. General instructions _________________________________ 13
3.1 General rules ____________________________________ 13
4. Installation _________________________________________ 14
4.1 Handling and lifting instruktion _____________________ 14
4.2 Acceptance inspection ____________________________ 15
4.3 Preparations for installation ________________________ 15
4.4 Distribution of oil _________________________________ 15
4.5 Electrical connection ______________________________ 15
4.6 Mount the burner on the boiler _____________________ 16
4.7 Check oil line seals _______________________________ 16
4.9 Example of basic settings _________________________ 17
4.8 Recommended surplus air ________________________ 17
4.10 Setting values for air damper B 80 __________________ 18
4.11 Setting values for insert B 80 _______________________ 18
4.12 Insert control movable brake disc ___________________ 19
4.13 Air setting _______________________________________ 19
5. Burner servicing ____________________________________ 20
5.1 Servicing the combustion device ___________________ 20
5.2 Servicing air dampers ____________________________ 21
5.3 Replacement of damper motor, air __________________ 22
5.4 Replacing the oil pump ___________________________ 23
5.6 Replacement of electrical components ______________ 24
5.7 Vibration ________________________________________ 25
6. Instructions Pump RSA 95 & 125______________________ 26
6.1 Technical data ___________________________________ 26
6.2 Components ____________________________________ 26
6.3 Mounting/dismounting by-pass plug ________________ 26
6.4 Purging _________________________________________ 26
6.5 Replacing the filter _______________________________ 26
6.6 Function Danfoss RSA 95 - 125 ____________________ 27
6.7 Suction line tables ________________________________ 28
7. Electric equipment __________________________________ 29
7.1 Safety system __________________________________ 29
7.2 List of components _______________________________ 30
8. Control _____________________________________________ 31
8.1 Technical data ___________________________________ 31
8.2 LED indicator lamps ______________________________ 31
8.3 Explanation of the different sequence modes _________ 32
8.4 BurnerPro LED fault/lock code table ________________ 33
10. Preface __________________________________________ 36
9. JUMO dTRON 316 __________________________________ 36
11. Identifying the instrument version __________________ 37
12. Mounting _________________________________________ 38
12.1 Preparation _____________________________________ 38
12.2 Fitting in position, Type 703042/43/44 _______________ 38
12.3 Fitting in position, Type 703041 ____________________ 38
13. Electrical connection ______________________________ 39
13.1 Connection diagram for Type 703041 _______________ 39
13.2 Connection diagram for Type 703042/43/44 _________ 40
14. Displays and keys _________________________________ 41
15. Operation ________________________________________ 42
15.1 Level concept ___________________________________ 42
15.2 Level inhibit _____________________________________ 42
15.3 Entering times ___________________________________ 43
15.4 Operation of the fixed-setpoint controller _____________ 43
15.5 Operation of the program controller _________________ 44
15.6 Operator level „OPr“ _____________________________ 45
16. Parameter level „PArA“ ___________________________ 45
17. Configuration level „ConF“ ________________________ 46
17.1 Analog inputs “InP” _______________________________ 46
18. 9 Configuration level „ConF“ _______________________ 47
18.1 Controller „Cntr“ _________________________________ 47
18.2 Generator „Pro“ __________________________________ 47
18.3 Utgångar „OutP“ _________________________________ 48
18.4 Display „diSP“ ___________________________________ 48
19. Autotuning _______________________________________ 49
20. Alarms ___________________________________________ 49
21. Fault Location ____________________________________ 50
21.1 Burner will not start _______________________________ 50
21.2 Burner will not start after normal use ________________ 50
21.3 Delayed ignition __________________________________ 51
21.4 Noise in pump ___________________________________ 51
21.5 Pump pressure __________________________________ 51
22. Log of flue gas analysis ____________________________ 52
23. Oil burners maintenance instructions _______________ 53
To Next Page
Loading...
