BEP TS1 - Programming and Setup; Setup Components Overview; Problem Solving; Water Tank Condensation Issues

INST-TS1-V13
18/11/10
Page 10
6. Programming and Setup
Please visit the BEP website for the programming software.
7. Problem Solving
Water Tanks
After long periods of no use, condensation will build up on the roof of the water tank and the
sender face. If the water droplets are large, the sender will not be able to read the contents
of the tank accurately. This will clear with normal boat or RV use.
Waste Tanks
Large amounts of foam bubble on the surface of the liquid caused by detergents or washing
powders will result in the sender not receiving reflected sound pulses back from the liquid
surface, instead these will be absorbed by the bubbles until they disperse. Then normal
operation will resume.
Interface Box + USB-to-Serial Converter Cable
(BEP P/N TS1-PK)
Computer with USB Port
TS1 Tank Sender
(BEP P/N TS1)