IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
&
This symbol points out important safety instructions which,
if
not followed, could
endanger the personal safety and/or property
of
yourself and others. Read and follow
all instructions in this manual before attempting to operate your machine.
Failure to comply with these instructions may result in personal injury.
General Operation
• Read, understand, and foll
ow
all instructions in the manual and on the machine before
starting. Keep this manual in a safe place for further and regular reference and for ordering
replacement parts.
• Only allow responsible individuals familiar with the instructions to operate t
he
machine. Be
sure to know controls and how to stop the machine quickly.
• Never put your hands near moving parts.
• Only allow qualified individuals
for
the maintenance
of
your machine.
• Remove all obstacles, which may interfere with the machine functions.
• Clear the work area such as electrical wires, buckets,
kn
ives etc.
•
Be
sure that everyone else is clear
of
your work area before operating the machine.
• Do not sit nor stand on the machine.
• Always turn
off
the machine after your work is done. Never leave a running machine
unattended.
• Always disconnect and wait till the machine has cooled before attempting any
ma
intenance.
• Do not wear loose fitting clothes or jewellery as they may get caught in moving parts
of
the
machine.
• Always wear security shoes, to prevent injury caused by moving the machine or objects
falling from the machine.
• Never exceed the time limit to seal, which is recommended by the manufacturer. This is to
avoid any damage that may be caused to the sealing bars and to eliminate the risk
of
fire in
the
machine. Thus avoiding corporal burns.
• Never touch the sealing bars after they have been used, this will avoid corporal burns.
Wait
a few minutes to let the machine cool down before touching.
• Always make sure that the sealing bars are well installed in their "Guide Blocks" before
starting a cycle.
• Never incline the machine more than 30 degrees, it may tip over and hurt someone
seriously.
•
Work
only in daylight or good artificial light.
Do
not
operate the machine while under the influence
of
alcohol
or
drugs!
3
To Next Page
Loading...
