Berkel 823 - Metallic Build-Up; Cleaning and Sanitizing (Disassembly)

B. METALLIC BUILD-UP
··:•I
• • •I
. -:.:
After repeated sharpenings - even with a clean knife blade -
you may get a metallic build-up on the face of the stones.
This is caused by tiny particles of metal tilling the spaces
between the stone grits. This appears as a dark, shi~y
coating on the grinding surface of the stones.
To remove this metallic build~up, we recouunend that the stones
be scrubbed a stone cleaning tool part# 4975-09237, dipped
in a solution of water and household ammonia. Rinse, dry and
oil as previously described.
In heavy duty use, we recommend that a spare set of stones be
kept available for thorough cleaning procedures, and in case
.of breakage, so you will not lose your sharpening
capabilities.
VII CLEANING AND SANITIZING (DISASSEMBLY}
1.
Turn the thickness control knob all the way to the right
to close the gauge plate.
2. Turn switch to OFF and unplug the power cord •
.
3.. Remove .. the product table locking knob.
· 4 • Remove the product table.
5. The pushex:: can slide or rotate, so REEP THE PRODUCT TABLE
LEVEL.··
6. Remove the slice deflector which is attached to the main
slicer body.
(5)