Bernard Controls AQ5 User Manual

AQ Switch
RANGE
Start Up Guide
SUG_17003 EN - Ind. C
Art: 5100466

Bernard Controls AQ5 Specifications

General

Brand	Bernard Controls
Model	AQ5
Category	Switch
Language	English

Summary

Intended Use of the Actuator

Safety

Packaging, Storage and Maintenance

Assembly on the Valve or Damper

Electrical Commissioning

7.2 Before Wiring

7.3 Wiring Without Positioner Option

Provides detailed steps for wiring the actuator when no positioner is installed.

7.4 Wiring With Positioner Option

Details wiring procedures for actuators equipped with a positioner option.

7.5 After Wiring

Lists essential checks to perform after the actuator wiring is completed.

Calibration of Travel Limits

8.1 Calibration of Cams Corresponding to End Position Switches

Details how to calibrate cams for end position switches to stop the actuator correctly.

8.2 Calibration of Mechanical Stops

8.4 Calibration of Positioner (OPTION)

Provides steps for calibrating the positioner, including voltage checks and stroke calibration.

Calibration of Position Options

9.1 Position Feedback Potentiometer (OPTION)

Details how to set the position feedback potentiometer for accurate valve position reporting.

9.2 TAM Position Transmitter (OPTION)

9.3 Positioner Board Setting (OPTION)

Torque Limiting Device (Except on AQ5/10/15)

10.1 Torque Limiter Operation

10.2 Torque Limiter Adjustment