Bernard Controls AQ30 - User Manual

AQ Switch
RANGE
Start Up Guide
SUG_17003 EN - Ind. C
Art: 5100466

Bernard Controls AQ30 Specifications

General

Brand	Bernard Controls
Model	AQ30
Category	Switch
Language	English

Summary

3 SAFETY

6 ASSEMBLY ON THE VALVE OR DAMPER

7 ELECTRICAL COMMISSIONING

7.2 Before wiring

7.3 Wiring without positioner option

7.4 Wiring with positioner option

7.5 After wiring

8 CALIBRATION OF TRAVEL LIMITS

8.1 Calibration of cams corresponding to end position switches

Step-by-step guide to calibrate cams for end position switches, ensuring correct stop positions.

8.2 Calibration of mechanical stops

Procedure to calibrate mechanical stops to prevent over-travel and protect the valve.

8.4 Calibration of positioner (OPTION)

Steps to calibrate the positioner, including voltage checks and stroke calibration.

9 CALIBRATION OF POSITION OPTIONS

9.1 Position feedback potentiometer (OPTION)

How to set the potentiometer circuit board for accurate valve position feedback.

9.2 TAM position transmitter (OPTION)

Explains the TAM transmitter (4-20 mA signal), its connections, and signal inversion.

9.3 Positioner board setting (OPTION)

Configuration settings for the positioner board, including input signal type and dip switches.

10 TORQUE LIMITING DEVICE (EXCEPT ON AQ5;10;15)

10.1 Torque limiter operation

10.2 Torque limiter adjustment