Need help?Do you have a question about the Bernard Controls AQ50 and is the answer not in the manual?
General| Brand | Bernard Controls |
|---|---|
| Model | AQ50 |
| Category | Switch |
| Language | English |
Describes the two primary actuator configurations: 'Without Positioner' and 'With Positioner', detailing their components.
Explains how to adjust cams to trigger switches for accurate open and closed end position detection.
Guides on adjusting mechanical stops to protect the valve from over-travel, ensuring the motor stops at limit switches, not mechanical stops.
Provides detailed steps for calibrating the positioner, including voltage checks and position validation using local commands.
Describes how the torque limiter operates by using cams to trigger switches when rotational resistance exceeds a set limit.
Provides instructions for adjusting the torque limiter settings for both closing and opening directions using the scale disks and cams.
To Next Page