sew&go1/3/5
Raising the bobbin thread
1. Hold the upper thread with the left hand.
Turn the handwheel towards you
(counterclockwise) lowering, and then raising
the needle.
2. Gently pull on the upper thread to bring the
bobbin thread up through the stitch plate
hole.
3. Lay both threads to the back under the
presser foot.
Note:
If it is difficult to raise the bobbin thread, check
to make sure the thread is not trapped by the
hinged cover or the sewing table.
3
2
1
21
To Next Page
Loading...
