Bernette Sew&Go 3 - Triple Straight; Zigzag

37
sew&go 3 / 5
Triple straight / zigzag
Stitch width dial Stitch length dial
Stitch width dial
Stitch length dial
2
1
1. Triple straight stitch
2. Triple zig-zag
For hardwearing seams.
Turn the stitch length dial to "S1".
The machine sews two stitches forwards and
one stitch backwards. This gives triple
reinforcement.
For hardwearing seams, hems and decorative
seams.
Turn the stitch length dial to "S1" .
Adjust the stitch width dial to between "3" and
"5". (model sew&go 5)
Triple zig-zag is suitable for firm fabrics like
denim, corduroy, etc.