Bernina 8 Series Service And Maintenance Manual

BERNINA International AG · Seestrasse 161 · CH-8266 Steckborn · Switzerland 5
1.3 Tools and gauges.
Required tools and gauges:
Commercially available (not available from BERNINA International):
- Multimeter.
- TORX screw driver sizes: No. 6, 8, 10, 15, and 20.
- 7mm open end / ring spanner.
Article No. Description Usage Picture
398 083 030 Circlip mounting tool Mounting all circlips
398 112 030 Spring mounting tool Mounting all springs
002 733.50.00 Angular pinning tool
Pinning various
positions
031564.50.01
Pair of composite
tweezers
Disconnecting ribbon
cables
032948.50.00 IC-Extraction tool Extracing the EEPROM
Commercially Digital Multimeter
Measuring
resistance/voltage

Bernina 8 Series Specifications

General

Brand	Bernina
Model	8 Series
Category	Sewing Machine
Language	English