EasyManua.ls Logo

Bernina Bernette 25 - Blind Hem

Bernina Bernette 25
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fold the fabric as illustrated with the reverse
side uppermost.
First carry out an overcasting stitch as
shown in left picture.
Place the fabric under the foot. Turn the
handwheel forwards by hand until the needle
swings fully to the left. It should just pierce
the fold of the fabric. If it does not, adjust the
stitch width accordingly.
Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
Sew slowly, guiding the fabric carefully along
the edge of the guide.
Turn over the fabric.
07 Blind hem/lingerie for firm fabrics
16 Blind hem for stretch fabrics
:
:
16mm 8mm
Reverse
side
Reverse
side
a
b
2.5~4.0
1.0~2.0
Please Note:
It takes practice to sew blind hem. Always
make a sewing test first.
Blind Hem
Basic Sewing Procedures
Overcasting
stitch
8mm
40

Table of Contents

Other manuals for Bernina Bernette 25

Related product manuals