Select stitch pattern 50 or 51 to get the
darning stitch.
Change the presser foot to the buttonhole foot.
Pull the button holder to rear.
Set the button guide plate on buttonhole foot
to the desired length.
Baste the upper fabric and the under fabric
together.
Select the needle position. Lower the
presser foot over the center of the tear.
3.5~7.0
1.0~2.0
Darning Stitch
The size of one darn cycle is variable.
However, the maximum stitch length is
2.6cm (1 inch) and the maximum stitch width
is 7mm (9/32 inch).
a. The length of sewing.
b. The width of sewing.
D
Basic Sewing Procedures
50: Simple darning stitch in thin and medium
fabrics
51: Reinforced darning stitch in heavy fabrics
To Next Page
Loading...
