Why does my Bernina Sewing Machine skip stitches?
Skipped stitches can occur if the needle and/or threads aren't suitable for the fabric, a blue shank needle isn't used for stretch/fine fabrics, the thread isn't threaded properly, a poor-quality needle is used, or the thread tension is too tight.
What to do if buttonhole sewing is not sewn properly on my Bernina Sewing Machine?
If buttonhole sewing isn't sewn properly, it could be because the stitch density isn't suitable for the fabric or if suitable interface material hasn't been used for stretch or synthetic fabric. In both cases, use an interfacing.
What to do if my Bernina Bernette b37 does not work?
The machine may not work if it is not plugged in, if thread has been caught in the hook race, or if the bobbin winder spindle is not returned to the left after bobbin winding.
Why does the needle thread keep breaking on my Bernina Bernette b37 Sewing Machine?
The needle thread may break for several reasons. It could be due to improper threading, thread tension being too tight, a bent or blunt needle, incorrect needle insertion, failure to set the needle and bobbin thread under the presser foot before starting, not drawing threads to the rear after sewing, or using a thread too heavy or fine for the needle. In any of these cases, change the needle.
What to do if the needle breaks on my Bernina Bernette b37?
A needle can break for several reasons: incorrect insertion, a loose needle clamp screw, failure to draw threads to the rear after sewing, using a needle too fine for the fabric, an inappropriate presser foot for the stitch pattern, or if the needle is bent or blunt. In some of these cases, you should use proper foot. In other cases, change the needle.
What to do if the bobbin thread breaks on my Bernina Bernette b37 Sewing Machine?
The bobbin thread may break if it's not threaded properly in the bobbin holder, if lint has collected in the bobbin holder, if the bobbin is damaged and doesn’t turn smoothly, or if the thread is wound loosely on the bobbin. In all of these cases, replace the bobbin.
Why is my Bernina Bernette b37 Sewing Machine not feeding the cloth smoothly?
The cloth may not feed smoothly due to lint accumulation on the feed dog, stitches being too fine, or the feed dog not being raised after “drop feed” sewing. In all of these cases, make the stitches longer.
Why is my Bernina Sewing Machine seam puckering?
Seam puckering can occur if the needle is too heavy for the fabric or if the stitch length is too long for the fabric. In both cases, make the stitches shorter.
Why does my Bernina Sewing Machine form loops below the works?
Stitches may form loops below the works if the thread tension is too tight, or if the needle is either too heavy or too fine for the thread.
Why is my Bernina Sewing Machine not running smoothly and is noisy?
The machine may not run smoothly and be noisy if thread has been caught in the hook race, or if lint has built up in the hook race or bobbin holder.
Essential safety guidelines and warnings for operating the sewing machine.
Identifies all parts of the sewing machine with corresponding numbers.
Instructions for connecting power, initial checks, and using controls.
How to adjust sewing speed and use machine operating buttons.
How to attach/remove presser feet and adjust the feed dog.
Step-by-step guide for winding and inserting the bobbin.
General| Stitch Options | 50 |
|---|---|
| Buttonhole Styles | 1 |
| Maximum Stitch Width | 5 mm |
| Maximum Stitch Length | 4 mm |
| Needle Positions | 3 |
| Free Arm | Yes |
| Weight | 6.6 kg |
| Needle Threader | Yes |
| Feed Dog Drop | Yes |
| Speed Control | Yes |
| Presser Feet | Included |
To Next Page