EasyManua.ls Logo

Bernina Bernette b37 - Appliqué; F F F a a Ff; F F F F F Ff; Scallop Stitch

Bernina Bernette b37
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Scallop Stitch
Stitch pattern: 37
Thread tension: 3 - 6
Presser foot: Zigzag foot
* Stitch pattern 45 can also be used.
Sew the stitches approximately 3/8˝ (1 cm) inside the edge of the
fabric.
Trim the outside of the stitches as shown. Make sure you don’t
cut the thread.
Appliqué
Stitch pattern: 5, 24, 25 or 26
Thread tension: 1 - 4
Presser foot: Satin stitch foot
* The stitch width of pattern 5, 24, 25 or 26 can be changed
without changing it’s center needle position.
Place an appliqué on the fabric and baste or pin it in place.
Sew while guiding the fabric so the needle falls along the outer
edge of the appliqué.
Appliqué
Outer edge
To adjust the stitch width
Select pattern 24.
Press the cursor buttons to move the cursor under the
stitch width value “3.5” (default setting).
Press the button to decrease stitch width .
Press the button to increase stitch width .
The stitch width will be varied based on the centered needle
position .
Stitch width (3.5)
Stitch pattern 24 (stitch width decreased)
Stitch pattern 24 (stitch width increased)
Center needle position
0
R
17
F
34
F
1
A
18
R
35
F
2
A
19
R
36
A
3
A
20
R
37
A
4
A
21
R
38
F
5
A
22
F
39
F
6
A
23
F
40
F
7
A
24
F
41
F
8
A
25
F
42
F
9
A
26
F
43
F
10
A
27
F
44
F
11
A
28
F
45
F
12
A
29
F
46
F
13
F
30
F
47
F
14
A
31
F
48
F
15
F
32
A
49
F
16
F
33
F

Table of Contents

Related product manuals