22
• Auto-o timer
The machine will be turned off if you do not use the machine
within the time period set by this timer.
The auto-off timer can be set from 1 to 12 hours.
The default auto-off timer setting is 7 hours and “07” sign
appears on the screen.
To enter the setting mode, press and hold the needle stop
up/down button and turn the power switch on until the
setting screen "Auto-off timer" is shown (01).
Press or button to increase or decrease the setting
value.
If you wish to turn off the timer, press and hold or but-
ton until “oFF” sign appears on the screen.
Press the start/stop button to apply the setting.
Setting Mode
PLEASE NOTE:
The auto-off timer is available in EU countries and some
regions which use 200 - 240 voltage standards.
To Next Page
Loading...
