Bernina Bernette 340 deco - Getting Ready to Embroider; Attaching the Embroidery Hoop to the Machine

Getting Ready to Embroider
19
1
3
2
1
Attaching the Embroidery Hoop to the Machine
Turn the attaching knob so it is parallel with the hoop, and set it on
the carriage.
1. Attaching knob
2. Carriage holes
3. Pins
Turn the attaching knob clockwise.
Caution:
• Alwaysprovidesufficientclearancefortheembroiderycarriage
behind your machine before starting the machine.
• Donotforcetomovethecarriagebyhand.
• Returnthecarriagetotheidlepositionbeforeturningthepower
off. Use the keys Utility and Return Carriage as described on
page 25.