Bernina Sergers - Page 17

Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGERS 2/15/03 17
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Balanced 4-Thread Overlock
Upper Looper .............................. 3-5 Cutting Width ..............................2-3
Lower Looper .............................. 3-5 Stitch Length ......................... 2.5mm
Left Needle ................................. 3-5 Differential Feed ............................ N
Right Needle ............................... 3-5 Rolled Edge Lever ........................ in
Adjusting Tensions Samples
increased left & right needle tensions
decreased left needle tension
decreased right needle tension