Bernina Sergers - Thread Overlock

Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
58
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Wide Three-Thread Overlock Seam
Using the small screwdriver and brush/needle insertion tool, remove
the right needle. Note: If necessary, insert left needle before removing
right needle.
Snug the needle set screw after removing the needle.
Following the diagrams in your owner’s manual, thread the serger
for a wide 3-thread overlock stitch.
Set all thread tensions as indicated for a balanced stitch.
Adjust cutting width to 2mm (normal).
Adjust stitch length to 2.5mm (normal).
Fold fabric in half to 2½” x 6”.
Serge along the folded edge of the fabric.
Trim and mount the sample.
Fabric ........................................................... mediumweight wool, 5” x 6”
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 3 cones serger thread
Presser Foot .............................................................................. standard
Stitch .................................................................... wide 3-thread overlock