Bernina Sergers - 3-Thread Super Stretch Stitch

Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
90
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
3-Thread Super Stretch Stitch
Attach the 2-thread adapter (upper looper converter) to the upper
looper. Note: This is an optional accessory for the 700D.
Following the instructions in your owner’s manual, thread the serger
for a super stretch stitch using Woolly Nylon in the lower looper. Adjust
settings as indicated.
Adjust the stitch length to 2.5mm (normal).
Fold the Lycra in half to 2½” x 6”.
Place the fabric under the foot and serge, cutting off the fold.
Trim and mount the sample
Fabric ......................................................... cotton or nylon Lycra, 5” x 6”
Needle ................................................... 80/12 Stretch or 75/11 Ballpoint
Thread ................................................................... 2 cones serger thread
..........................................................................1 cone YLI Woolly Nylon
Presser Foot .............................................................................. standard
Stitch ..................................................................... 3-thread super stretch