Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
74
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Blindstitch Foot - Blind Hem
Set the serger for a narrow 3-thread flatlock stitch (right needle).
Set needle thread tensions as directed in the instruction leaflet for the
Blindstitch Foot.
Adjust the stitch length to 4mm.
Attach the Blindstitch Foot.
Following the instructions in the leaflet for the Blindstitch Foot, fold the
fabric for a 1½” blind hem and place the fabric under the foot. Adjust the
fabric guide so that the needle just catches the fold in the stitching.
Serge the hem, keeping the fold of the fabric against the guide.
Press the hem.
Trim and mount the sample.
Fabric .......................................................................cotton jersey, 5” x 6”
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 3 cones serger thread
Presser Foot ............................................................................ Blindstitch
Stitch .................................................................. narrow 3-thread flatlock
To Next Page
Loading...
