Bernina Sergers - Page 42

Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
42
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Attaching Ribbing
Thread the serger for a 4-thread overlock stitch using Woolly Nylon
in both loopers. Set tensions for a balanced 4-thread overlock.
Cut a mock neckline on the corner of the fleece (quarter circle).
Fold the ribbing in half (wrong sides together) to 1¾” x 6”.
Matching raw edges, place the ribbing to the neckline on the right
side of the fleece.
Serge the ribbing to the fleece, stretching the ribbing to meet the
fleece neckline.
Trim and mount the sample.
Fabric ............................................................... sweatshirt fleece, 4” x 6”
.......................................................................ribbing, 6” wide x 2½” long
Needle ............................................................. 75/11 Stretch or Ballpoint
Thread ............................................................... 2 cones of serger thread
........................................................................ 2 cones YLI Woolly Nylon
Presser Foot .......................................... Standard Foot with Tape Guide
Stitch ............................................................................ 4-thread overlock