27
EN
• After adjusting the adjustable feet, check that the
appliance is level both side-to-side and back-to-
front by placing a level on the floor of the freezer
compartment (the drawer should be removed for
this).
Adjusting the refrigerator based on the cabinet
niche.
• For products with supplied stainless steel panel
doors, the position of the unit is adjusted so that
the door and the cabinet surface are flush and
a min. 1/8” distance from panels and gables is
ensured.
A/D –Turn the adjusting rod clockwise to lift the front
B/C –Turn the adjusting rod clockwise to lift the rear
To Next Page
Loading...
