13
Disabling the Buzzer
To manually stop the buzzer, press any button.
Re-enabling the Oven
At the end of automatic or semi-automatic cooking,
the A symbol will fl ash on the display. The oven is
disabled in this condition. To re-enable the oven,
press and hold the M button until the
symbol
turns on.
Cancelling a Cooking Program
To cancel a cooking program, press and hold
the + and - buttons simultaneously for at least 2
seconds, or in any case until the symbol is
displayed.
Checking the Status of the Functions
The set or remaining time of each function off ered
by the programmer can be shown on the display.
• Press and hold the M button for at least 2
seconds, or in any case until the
symbol is
displayed.
• The remaining time will be shown on the
display, or else a series of zeroes if the timer
is disabled.
• Press the M button again. The text “dur” will
appear on the display, which will then alternate
with the remaining time or a series of zeroes
(timer disabled).
• Pressing the M button again will display the
programmed end-of-cooking time with the text
“End”.
•
Changing the Current Time and Adjusting the
Buzzer Volume
With the programmer in standard mode and the
symbol displayed,
• press and hold the + and - buttons
simultaneously for at least 2 seconds or in any
case until the . dot fl ashes.
• Press the + or - button to change the time.
Adjusting the buzzer volume
• Press the M button. The following text will be
shown on the display: “ton ...” followed by a
number
• Select the required volume using the + or -
button.
A power outage will cause the programmed
settings, including the clock, to be lost. Once
the power is back on, the programmer can be
reprogrammed.
/ Using display
USING DISPLAY
To Next Page
Loading...
