62 WWW.BERTIN-INSTRUMENTS.COM
Multisensor Unit D/T
The Multisensor Unit is an external sensor module
e differential pressure-
and temperature sensor particularly developed for AlphaGUARD (e.g. for radon
measurement applications in buildings).
A shielded cable belongs to the delivery of both types. The cable is provided with
a plug for the Interface for external sensors 1. This cable serves for the electrical
AlphaGUARD and the Multisensor Unit. This assures the
transmission of the analog signals of the sensors as well as their voltage supply by
the battery of the AlphaGUARD.
The Multisensor Unit is also equipped with an electrical socket by which the
Multisensor Unit and AlphaGUARD
can be supplied by an external voltage source
(AlphaGUARD-mains/charging adapter). Alternatively, the unit as well as the
AlphaGUARD (if connected) can be powered by a booster battery which has to
be attached using the MINI-DIN-8S plug.
Figure 55:
After establishing the electrical connection between an AlphaGUARD and the
Multisensor Unit and start of operation, the correct function of the sensors and the
signal transmission can be checked directly.
Only use the original cable.
To Next Page
Loading...