28 WWW.BERTIN-INSTRUMENTS.COM
Function menu
The function menu can be called up by pushing the menu button . Several
functions and settings are available in the function menu. Use the
or Scroll
down button to navigate and push the Enter button to enter a sub item.
Function menu
11.08.16 12:27:47 4min
Set marker
Set pump flow
Lock device
Acoustic monitoring
Configure channel 1
Configure channel 2
Settings menu
Set operation mode
Set interval mode
Set location ID
Figure 17: Function menu
7.2.1 Set marker
This function allows time markers to be placed within the current data series. Set
time markers are represented in the
“DataVIEW PRO” or "DataEXPERT" software by
a straight line entry in the status area of the data window.
Only one-time marker can be set per each storage cycle, e.g. according to the
selected cycle length 1 x per 1 min, 1 x per 10 min or 1 x per 60 min
To Next Page
Loading...