Besam Swingmaster MP User Manual

.,.".--'~------- ---- ----...---~ --
.:.......... . ..' '. "', ""
. . •.•.. ""
'S..... ~\
.; ~
Manual
US23-0186-01
Swi ngmaster@ MP
IK-A (Concealed) 8, ~~'<, l,o,',;.ceApplied); Bottom Load & Fire Door
S\tvi ng Door Operator
Installation, Adjustment and Troubleshooting Manual
.:, " ..
i
..
Applications:
• All Pedestrian Applications
• Colleges/Schools
• Light Industry
• Medical Centers
• Office Buildings
• Pharmacies
-• Residential
• Shopping Malls
• Speci,alty
i
• Fire Ooors
• Concealed or Sl;face Mounted
Complies with \NSI/BHMA A 156.10-1999 standards for power
operated pedestrian doors. UL 325 Listed
SwingmaslerMP US23-0186-01 3-26-99
C CopyrlQh! 1999 Besarll AUlomated Enlrance Systems. Inc. May not be repnrfed .':'\OUt pem'llssion.
._ ..•. _'" _..... _ ,__ , __ ..l.

Besam Swingmaster MP Specifications

General

Brand	Besam
Model	Swingmaster MP
Category	Door Opening System
Language	English

Summary

Wiring the CUP Control Unit

3 Position Switch Configuration

Details on the 3-position switch legend plate and mounting placement.

Adjusting the CUP Control Unit

Wiring Options for Door Control

3-Position Program Switch Setup

Configuration of the 3-position switch for door operation modes.

3-Position Switch for Push Reactivation

Setting up the 3-position switch to deactivate Push Reactivation.

Wiring Electric Strike and 4-Position Switch

Configuration for electric strike and 4-position switch functionality.

Wiring Options – EXS Expansion Module

EXS Expansion Module Installation

Instructions for installing the EXS module onto the CUP control unit.

Connecting Radio Frequency Remote Control

Procedure for connecting the RF remote control receiver unit.

Two Pushplate Configuration

Wiring a pushplate with normally open switch for key operation.

EXS Terminals and Functions

Detailed functions of each terminal on the EXS expansion module.

Troubleshooting Guide

Motor and Control Operation Faults

Diagnosing issues with motor start, control power, and door opening.

Door Movement and Angle Problems

Resolving issues with door opening/closing completeness and angle.

Component and Communication Faults

Troubleshooting overheating, PMD, and communication errors.

PMD Codes, Tests, and Status

PMD Error Codes Explained

List and interpretation of PMD error codes and their remedies.

Testing with the PMD

Procedure for initiating system tests using the PMD.

PMD Status Codes Interpretation

Understanding the normal status codes displayed by the PMD.

Door and Operator Handing

Door Handing Determination

Defining door handing based on hinge side and swing direction.

Operator Handing Types

Illustrations of concealed and surface-applied operator handing.

Architectural Hardware Handing

Understanding reverse designations for hardware like panic devices.