46 / 49
Chapter10 Safety
10.1 Employee instruction
➢ Only authorized, trained and guided personnel are allowed to operate, repair and maintain
the machine.
➢ Only specially trained professionals can use electrical, pneumatic, hydraulic and laser
equipment.
In addition, following measures must be performed before the operator works on the equipment:
1. Understand the possible danger.
2. Operators are required to wear protective clothing and gloves by users if necessary. The
stipulation is mainly applied when taking out the thermal workpiece and suitable tools
should be used if necessary. It is necessary to wear appropriate laser protective glasses by
principle under the maintenance service operation mode (level-4 laser device). Wear a dust
mask that clings to the face by principle (anti-toxic-particle and dust-proof mask with filter
grade P3) when operating the dust collector.
3. Responsibilities of operation, maintenance, overhaul, etc. should be clearly defined to
avoid unclear definition of function and power.
4. Read the technical literature of the equipment. We recommend that the user should
require for a written confirmation of reading and understanding the technical literature
from the operator each time.
To Next Page
Loading...